Enquiry

Features


Differnt Edges

Kavar Sink Products

Beanding

Kavar Sink Products

Triple Beanding

Kavar Sink Products

Sound Dempending

Kavar Sink Products

Plastic Coating

Kavar Sink Products

Glossy

Glossy finished sinks have mirror like shining look...

Kavar Sink Products

Satin

Satin finished sinks have that rich, buffed silver look achieved by a vary Hi-tech process. Only ‘Nirali’ has the special polishing machines especially imported from Germany & Italy for this finish..

Kavar Sink Products

Anti-scratch

The special different dotted surface on these sinks give it Anti Scratch properties. Anti scratch sinks retain their contemporary elegant & immaculate Looks for years...

Beedings

Set On

Kavar Sink Products

These Sinks are having border thickness of 18 mm It is ideal if installed flush with granite.

Inset

Kavar Sink Products

Inset type sinks have borders lined With clips ideal for modular kitchens !

Plain

Kavar Sink Products

Plain type sinks have flat borders For correct sandwiching between the platform top and Granite slabs.

Insent

Step-1

Kavar Sink Products

Place the sink in upside down position. Then attach clips into rectangular slots of the rim along the border, as shown in the sketch.

Step-2

Kavar Sink Products

Refer the sketch & make cut out in the Tabletop 10 MM less from each side than the outer size of sink. Make the step as shown in figure for flushing the sink border with Tabletop (If flushing isrequired)

Step-3

Kavar Sink Products

Lift the sink, turn it facing up. Lower it into the cutout smoothly.

Step-4

Kavar Sink Products

Turn the bracket of the clip 90 degrees so that the teeth of clips are under the tabletop. First tighten the center clips of each roil and then move to the outside clips. All clips must be tightened evenly. Do not over tighten the clips as damage can result.